Energy Efficiency in Buildings in Hot Humid Climatic Regions Using Phase Change Materials as Thermal Mass in Building Envelope

Abstract

Air conditioning energy consumption in summer represents a challenge in many areas with hot and humid climates. Passive cooling with thermal storage in phase change materials (PCMs) is a very effective way to improve thermal stability of the rooms with light-weight envelope. The main objective of this research is to demonstrate experimentally that it is possible to improve the thermal comfort and reduce the energy consumption of a building without substantial increase in the weight of the construction materials with the inclusion of PCM. This work aims at presenting an overview of the key researches in the field of use of PCMs in buildings and presenting a green approach for their uses in building envelopes with specific implementation on the case of hot humid regions. Thermal behaviour of wall integrated with two different types of PCMS Polyethylene glycol (PEG) E600 and Capric Acid (C10 H20 O 2) was compared by measurements and calculations. Three test cells were built for comparative investigation of the efficiency of passive cooling with the use of the PCMs. This paper deals with the results of experiments carried out in the test cells and possibilities of activation of PCMs for effective passive cooling.

Keywords

Phase change material Thermal mass latent heat storage Passive cooling Green Architecture Building Envelope Hot humid climate

References

Pérez-Lombard

Ortiz

Pout

, A review on buildings energy consumption information. Energy and Buildings, 40 (3) (2008), pp. 394–398

Pew Centre on Global Climate Change, 2008. Climate change mitigation measures in India. International brief 2.

Shukla

P.R.

Chaturvedi

, Low carbon and clean energy scenarios for India: Analysis of targets approach. Energy Economics, 34 (2012), pp. S487–S495

Mehling

Cabeza

L.F.

, Heat and Cold Storage with PCM: An Up to Date Introduction into Basics and Applications. Springer (2008)

Sadineni

S.B.

Madala

Boehm

R.F.

, Passive building energy savings: A review of building envelope components. Renewable and Sustainable Energy Reviews, 15 (8) (2011), pp. 3617–3631

Cheng

Givoni

, Effect of envelope colour and thermal mass on indoor temperatures in hot humid climate. Solar Energy vol. 78 issue 4 April, 2005. p. 528–534

Sharma

Anupama

Dr Kdhote

Tiwari

, Climatic Responsive Energy Efficient Passive Techniques in Buildings. IE (I) Journal.AR- Vo l 84, April 2003

Santamouris, D.N. Asimakopoulos , (Eds), Passive Cooling of Buildings, James and James Science Publishers, London UK. 1996.

Brown

, The thermal mass of buildings in reducing energy consumption. Solar Energy Eng 1990;112:273–279.

10.

Kammerud

Ceballos

Curtis

Place

Anderson

(1984) Ventilation cooling of residential buildings. ASHRAE Transactions. Vol. 90 Part 1B.

11.

Shaviv

Yezioro

Capeluto

I. G.

(2001). Thermal mass and night ventilation as passive cooling design strategy, Int. Renewable energy. 24: 445–452.

12.

Sharma

Tyagi

V. V.

Chen

C.R.

Buddhi

(2009). Review on thermal energy storage with phase change materials and applications, Int. Renewable and Sustainable Energy Reviews. 13: 318–345.

13.

Givoni

, Climate considerations in building and urban design. New York: Van Nostrand Reinhold.(1998)

14.

Givoni

Building design principles for hot humid regions. Renewable Energy, Vol.5, Part II, pp. 906–916, 1994.

15.

Prabhu

P.A.

Shinde

N.N.

Patil

P.S.

Prof.

Review of Phase Change Materials for Thermal Energy Storage Applications. International Journal of Engineering Research and Applications (IJERA) ISSN: 2248–9622. Vol. 2, Issue 3, 2012, pp.871–875

16.

Lane

G.A.

Macro-encapsulation of PCM. Report no. ORO/5117-8. Midland, Michigan: Dow Chemical Company; 1978. p. 152.

17.

Anderson

, & Shires

(2002). The Green Guide to Specification (3rd ed). Oxford: Blackwell Science.

18.

Benard

Body

, and Zanoli

, 1985, Experimental comparison of latent and sensible heat thermal walls, Solar Energy, Vo l.34, No.6:475–487.

19.

Ravikumar

and Srinivasan

P. S.

. Heat transfer analysis in pcm filled rcc roof for thermal management. ARPN Journal of Engineering and Applied Sciences. VOL. 7, NO. 1, January 2012. pp.32–38

20.

Pasupathy

Velraj

. Phase Change Material Based Thermal storage for Energy Conservation in Building Architecture. International Energy Journal: Vol. 7, No. 2, June 2006 pp147–159

21.

Hawes

Feldman

, “Absorption of phase change materials in concrete”, Solar Energy Material and Solar Cells, 1992, Vol.27, pp.91–101.

22.

Castell

Martorell

Medrano

Pérez

Cabeza

L.F.

Experimental study of using PCM in brick constructive solutions for passive cooling

Energy and Buildings, 42 (2010), pp. 534–540

23.

Richardson

M. J.

and Woods

A. W.

: An analysis of phase change material as thermal mass. Proceedings of the Royal Society A (2008) 464, 1029–1056.

24.

Pasupathy

Velraj

and Seeniraj

R. V.

. Phase change material-based building architecture for thermal management in residential and commercial establishments. Renewable and Sustainable Energy Reviews 12 (2008) 39–64.

25.

Alawadhi

Esam M.

. Thermal analysis of a building brick containing phase change material Energy and Buildings Volume 40, Issue 3, 2008, Pages 351–357

26.

Raja

I.A.

Nicol

J.F.

McCartney

K.J.

, and Humphreys

M.A.

, “Thermal comfort: Use of controls in naturally ventilated buildings,” Energy and Buildings, vol. 33, 2001, pp. 235–244.

27.

Auliciems

(1981). Towards a psycho-physiological model of thermal perceptions. International Journal of Biochemistry, 25, 109–122.

28.

Auliciems

& Dedear

(1986). Air conditioning in a tropical climate: Impacts upon European residents in Darwin, Australia. International Journal of Biometeor, 30(3), 259–282.