Closed-Form Equations for Flange Force and Maximum Deflection of Box-Beams of Fiber Reinforced Polymer with Partial Shear Interaction between Webs and Flanges

Abstract

Presented in the paper is the formulation of a governing second-order differential equation for the moment distribution along the length of a beam having two interfaces with partial shear interaction where two flange and two web components join to form the box shaped section. For practical applications such a closed-section beam of Fiber Reinforced Polymer (FRP) can be assembled from individual pultruded profiles using mechanical fasteners. This assembly approach can be used to construct deeper section sizes than can be achieved with a single pultrusion, and which can be transported in flat-pack units. In developing the governing equation for flexural response account is made of the finite connection stiffness at the web/flange interfaces by applying conventional elastic beam theory. The differential equation for the partial interaction problem is solved to formulate closed form equations for the flange force and the maximum deflection of a simply supported beam under four-point bending. A numerical parametric study is presented to show changes in beam performance indicators with the degree of shear interaction between the upper and lower bounds of full- and non-interaction. Results from a series of load tests using a three-layered prototype FRP beam are shown to be in good agreement. The theoretical predictions for maximum deflection are however found to be directly linked to the appropriateness of the measured connection stiffness entered into the closed-form equation.

Keywords

pultruded FRP beam deflection theoretical analysis

References

Anon (2003). EXTREN DWB® Design Guide, Strongwell, Bristol, VA, USA.

Anon (2010a). The New and Improved Pultrex® Pultrusion Design Manual (Imperial Version), Creative Pultrusions, Inc., Alum Bank, PA, USA.

Anon (2010b). Strongwell Design Manual, Strongwell, Bristol, VA, USA.

Anon (2010c). Fiberline Design Manual, Kolding, Denmark. (www.fiberline.com/)

Bank

L.C.

and Mosallam

A.S.

(1991). “Linear and nonlinear response of pultrudedFRP frames subjected to static loads”, Symposium on Plastics and Plastic Composite: Material Properties, ASME Winter Annual Meeting, Atlanta, Georgia, pp. 1–6.

Bank

L.C.

(2006). Composites for Construction-Structural Design with FRP Materials, John Wiley & Sons, NJ, USA.

Creative Pultrusion Inc. (2010). Literature Library. (www.creativepultrusions.com/rd.html)

Evernden

M.C.

(2006). Structural Evaluation of a Novel Box-Beam System of Pultruded FRP Shapes, PhD Thesis, University of Warwick, UK.

Evernden

M.C.

and Mottram

J.T.

(2006). “Characterization of Unistrut connection method with pultruded fiber reinforced polymer channels”, Journal of Materials in Civil Engineering, ASCE, Vol. 18, No. 5, pp. 700–709.

10.

Evernden

M.C.

and Mottram

J.T.

(2007). “Theoretical and experimental analysis of a modular PFRP box-beam concept constructed of separate plate elements and mechanical fasteners”, Proceedings of the 3rd International Conference on Advanced Composites in Construction (ACIC07), Bath, UK, pp. 379–388.

11.

Hayes

M.D.

and Lesko

J.J.

(2004). “The effect of non-classical behaviours on the measurement of the Timoshenko shear stiffness”, Proceedings of the 2nd International Conference on FRP Composites in Civil Engineering (CICE 2004), London, UK, pp. 873–880.

12.

Johnson

R.P.

(2004). Composite Structures of Steel and Concrete: Beams, Slabs, Columns, and Frames for Buildings, Blackwell Publications, Malden, MA, USA.

13.

Lane

(2002). An Experimental Investigation of Buckling Mode Interaction in PFRP Columns, PhD Thesis, University of Warwick, UK.

14.

Lee

Y.J.

Boothby

T.E.

and Nanni

(1999). “Slip modulus of FRP sheets bonded to concrete”, Journal of Composites for Construction, ASCE, Vol. 3, No. 4, pp. 161–167.

15.

Lutz

(2005). Structural Integrity of Bolted Joints for PFRP Profiles, PhD Thesis, University of Warwick, UK.

16.

Mottram

J.T.

(1991). “Structural properties of a pultruded E-glass fibre-reinforced polymeric I-beam”, Proceedings of the 6^th International Conference on Composite Structures, Paisley, UK, September, pp. 1–28.

17.

Mottram

J.T.

(1993). “Recommendations for the optimum design of pultruded frameworks”, Mechanics of Composite Materials, Vol. 29, No. 5, pp. 675–682.

18.

Mottram

J.T.

(2004). “Shear modulus of standard pultruded FRP material”, Journal of Composites for Construction, ASCE, Vol. 8, No. 2, pp. 141–147.

19.

Mottram

J.T.

and Johnson

R.P.

(1990). “Push tests on studs welded through profiles steel sheeting”, The Structural Engineer, Vol. 68, No. 10, pp. 187–193.

20.

Newmark

N.M.

Siess

C.P.

and Viest

I.M.

(1952). “Test and analysis of composite beams with incomplete interaction”, Proceedings of the Society of Experimental Stress Analysis, Vol. 9, No. 1, pp. 75–92.

21.

Oehlers

D.J.

and Bradford

M.A.

(1995). Composite Steel and Composite Structural Members — Fundamental Behavior, Elsevier Science, Amsterdam and San Diego, CA, USA.

22.

Rasheed

H.A.

and Pervaiz

(2002). “Bond slip analysis of fiber-reinforced polymer-strengthened beams”, Journal of Engineering Mechanics, ASCE, Vol. 128, No. 1, pp. 78–86.

23.

Roberts

T.M.

and Masri

H.M.K.J.A.H.

(2003). “Section properties and buckling behavior of pultruded FRP profiles”, Journal of Reinforced Plastics and Composites, Vol. 22, No. 14, pp. 1305–1317.

24.

Strongwell (2010). Strongwell Literature. (www.strongwell.com)

25.

Timoshenko

(1955). Strength of Materials, Part 1: Elementary Theory and Problems, Van Nostrand, New York, USA.

26.

Yam

L.C.P.

(1981). Design of Composite Steel-Concrete Structures, Surrey University Press, Guildford, UK.