Trunk Muscle Use during Pulling Tasks: Effects of a Lifting Belt and Footing Conditions

Abstract

Pulling tasks require the torso to act as a rigid link in order to facilitate the force transmission between the ground and the hands. In this study, we tested the hypothesis that a lifting belt increases the rigidity of the torso, thereby increasing pulling strength or reducing trunk muscle forces, or both, as pulling tasks are performed. Twelve volunteers performed maximal and submaximal isometric pulling exertions; the latter were performed on nonslippery and slippery surfaces. Electromyographic data from 8 trunk muscles, trunk kinematic data, and ground reaction forces were sampled during each exertion. Results indicated that the lifting belt had no effect during maximal exertions on the maximal pull forces generated or the muscle recruitment levels, irrespective of the pulling posture. The lifting belt did not affect the EMG data obtained during the submaximal (40% of maximum) exertions, even when participants pulled on a slippery surface. However, the slippery surface increased the coactivation within the trunk musculature, perhaps stiffening the torso in the event of a slip. The absence of a statistical interaction effect between the lifting belt and the footing condition (slipperiness) indicates that the belt did not alter the coactivation pattern and hence was not relied upon by the participants as a protective mechanism. The data presented here will assist those who must make decisions regarding lifting-belt use and those who train individuals in manual materials handling techniques.

Get full access to this article

View all access options for this article.

References

Andersson, G. B. J. (1997). The epidemiology of spinal disorders. In J. W. Frymoyer (Ed.), The adult spine: Principles and practice (2nd ed., pp. 93–141). Philadelphia, PA: Lippincott-Raven.

Andres, R. O. , & Chaffin, D. B. (1985). Ergonomic analysis of slip-resistance measurement devices. Ergonomics, 28, 1065–1079.

Ballance, P. E. , Morgan, J. & Senior, D. (1985). Operational experience with a portable friction testing device in university buildings. Ergonomics, 28, 1043–1054.

Chaffin, D. B. , & Andersson, G. B. J. (1991). Occupational biomechanics. (2nd ed.). New York: Wiley & Sons.

Chaffin, D. B. , Andres, R. O. , & Garg, A. (1983). Volitional postures during maximal push/pull exertions in the sagittal plane. Human Factors, 25, 541–550.

De Luca, C. J. , & Mambrito, B. (1987). Voluntary control of motor units in human antagonistic muscles: Coactivation and reciprocal activation. Journal of Neurophysiology, 58, 525–542.

Dempster, W. T. (1958). Analysis of two-handed pulls using free body diagrams. Journal of Applied Physiology, 13, 469–480.

Granata, K. P. , & Marras, W. S. (1993). An EMG-assisted model of loads on the lumbar spine during asymmetric trunk extensions. Journal of Biomechanics, 26, 1429–1438.

Grieve, D. W. (1983). Slipping due to manual exertion. Ergonomics, 26, 61–72.

10.

Harman, E. A. , Rosenstein, R. M. , Frykman, P. N. , & Nigro, G. A. (1989). Effects of a belt on intra-abdominal pressure during weight lifting. Medicine and Science in Sports and Exercise, 21, 186–190.

11.

Lanczos, C. (1988). Applied analysis. Englewood Cliffs, NJ: Prentice-Hall.

12.

Lander, J. E. , Hundley, J. R. , & Simonton, R. L. (1992). The effectiveness of weight-belts during multiple repetitions of the squat exercise. Medicine and Science in Sports and Exercise, 24, 603–609.

13.

Lavender, S. A. , Thomas, J. S. , Chang, D. & Andersson, G. B. J. (1995). Effect of lifting belts, foot movement, and lift asymmetry on trunk motions. Human Factors, 37, 844–853.

14.

Lee, K. S. , Chaffin, D. B. , Waikar, A. M. , & Chung, M. K. (1989). Lower back muscle forces in pushing and pulling. Ergonomics, 32, 1551–1563.

15.

Marras, W. S. , & Granata, K. P. (1996). The effects of lifting belts upon trunk motion, trunk muscle activity and spine loading. In Transactions of the 42nd Annual Meeting of the Orthopaedic Research Society (Vol. 21, p. 670). Park Ridge, IL: Orthopedic Research Society.

16.

McGill, S. M. (1992). A myoelectrically based dynamic three-dimensional model to predict loads on lumbar spine tissues during lateral bending. Journal of Biomechanics, 25, 395–414.

17.

McGill, S. , Seguin, J. & Bennett, G. (1994). Passive stiffness of the lumbar torso in flexion, extension, lateral bending, and axial rotation: Effect of belt wearing and breath holding. Spine, 19, 696–704.

18.

SAS Institute, Inc. (1985). SAS user's guide: Statistics (Version 5 Ed.). Cary, NC: SAS Institute.

19.

Tisserand, M. (1985). Progress in the prevention of falls caused by slipping. Ergonomics, 28, 1027–1042.

20.

Zatsiorsky, V. & Seluyanov, V. (1983). The mass and inertia characteristics of the main segments of the human body. In H. Matsui & K. Kobayashi (Eds.) Biomechanics VIII-B (pp. 1152–1159). Champaign, IL: Human Kinetics.