Surgical Innovation

To evaluate the impact of preoperative three-dimensional endoanal ultrasound (3D-EAUS) on the clinical outcome of anal fistula surgery.

The research consisted of multi-center retrospective case-control study including 253 consecutive adult patients undergoing surgery for confirmed or suspected primary fistula in ano who had undergone preoperative 3D-EAUS evaluation between January 2011 and January 2021. Main outcome measures were the concordance (K value) between ultrasound results and surgery in the identification of fistulas internal openings, primary tracts and secondary extensions and the 6 and 12 months success rate in patients with concordant and discordant findings.

A good agreement in the identification of the main fistulas characteristics between ultrasound results and operative findings was found. A significant difference (P < .0001; Fisher’s exact test) in the success rate was found between patients with concordant and discordant ultrasound results and operative findings in identification or location of internal opening. Particularly, all the 11 (4.8%) patients with discordant results experimented a failure of the surgical procedure at 6 months follow-up. At re-operation, the shift from discordant to concordant results was associated with an 81.8% 12 months success-rate.

The three-dimensional endoanal ultrasound preoperative evaluation may have a relevant impact on the outcome of a defined group of patients undergoing surgery for anal fistula, since the careful evaluation of ultrasound results could simplify the internal orifice intra-operative detection and improve the success rate.

The aim of the ILAM (Individualized Laparoscopic Anatomical Mesh) study was to create and implant a fully individualized mesh based on CT scans, taking into account the published body of knowledge about the material and mechanical behavior of the implant for laparoscopic inguinal hernia repair.

The team creating and conducting this study consisted of surgeons and engineers. A specific project was made and divided into 4 phases.

The process of development and implantation was divided into 4 milestones: CT scans and modeling based on predefined subgroups, mesh manufacture, certification and clinical evaluation.

The result of the study was the first individually designed hernia mesh to have been implanted in a human subject. After 12 months of follow-up, no recurrences or other complications were reported.

The new mesh provides a better anatomic fit to the patients’ inguinal region geometry. Mechanical stability is ensured by the multiple contact points between the implant and the tissues, which generate friction forces. Together with the possibility of shape design (proper overlap), the authors believe that there is no need for mesh fixation. If so, the use of such design meshes can change the guidelines in laparoendoscopic hernia repair in the future.

Buried free flaps represent a reconstructive challenge concerning monitoring of vitality, which is fundamental for an early detection of flap failure and prompt surgical salvage. Many flap monitoring techniques have been developed over time, and there is still no consensus concerning the best monitoring technique for buried reconstructions.

We performed a systematic review of the literature on NIRS monitoring for head and neck free flaps. Moreover, we presented a case of orbital reconstruction through a buried free myo-fascial anterolateral tight flap (ALTF) in which postoperative monitoring was performed by means of NIRS.

Four studies were included with a total of 200 monitored head and neck free flap reconstructions. Flap survival was reported in 96.5% of studies (n = 193/200) with a 3.5% of total flap failure rate (n = 7/200). We monitored the buried myo-fascial ALTF for 7 post-operative days measuring a regional oxygen saturation (rSO₂₎ ranging from 55% to 72% (mean = 66%).

This device appeared to be an efficient choice for monitoring buried flaps, thanks to its ability to measure tissue perfusion deep under the skin, to the continuous availability of recorded data on the monitor, and to its low impact on the patient. Further prospective studies are advised in order to standardize this monitoring technique and define warning values.

Competition-based learning (CBL) facilitates learning through competitions. At the 2022 & 2023 Annual SAGES meetings, we evaluated a CBL experience (TOP GUN Shootout) developed from a modified version of the previously validated TOP GUN Laparoscopic Skills and Suturing Program. The project sought to evaluate the TOP GUN Shootout’s (TGS) ability to enhance participant engagement in pursuit of laparoscopic surgical skills.

Participants competed in the TGS. Their scores (time and errors) were recorded for: Fundamentals of Laparoscopic Surgery Peg Pass, Cup Drop Task, and Intracorporeal Suturing. All participants completed a 10-question satisfaction survey on a 7-point Likert scale, with questions assessing 3 domains: (1) capability/confidence in MIS skill performance prior to the competition; (2) applicability and satisfaction with TGS’s capacity to develop MIS skills; and (3) interest in seeking additional MIS training and appropriateness of CBL in MIS training. Descriptive statistics were used to evaluate these areas.

Overall, 121 participants completed the TGS, of whom 84 (69%) completed the satisfaction survey. The average age was 32.9 years, 67% were males. On average (+/− SD), participant satisfaction was 5.04 (+/− 2.08) for Domain 1, 6.20 (+/− 1.28) for Domain 2, and 6.58 (+/− .95) for Domain 3.

Participants described an overall lack of confidence in their MIS skills prior to the 2022-2023 Annual SAGES conference. Participants felt that this brief CBL experience, aided in the development of their MIS skills. Furthermore, this brief CBL experience may inspire learners to seek out further training of their MIS skills.

The aim of this study was to compare the educational and academic quality of laparoscopic distal pancreatectomy (LDP) videos on YouTube^® and WebSurg^® platforms.

YouTube and WebSurg platforms were searched with the keyword “laparoscopic distal pancreatectomy”. According to the exclusion criteria, 12 videos were found on WebSurg. To ensure a 1:1 ratio, the first 12 videos that met the criteria on YouTube were also analyzed. Journal of American Medical Association (JAMA) benchmark criteria were used to evaluate the reliability of the videos. The non-educational quality of the videos was calculated using the Global Quality Score (GQS), the educational and academic quality of videos was calculated using Laparoscopic Distal Pancreatectomy-specific score (LDP-SS) and Laparoscopic Surgery Video Educational Guidelines scoring system (LAP-VEGaS).

The mean JAMA score was 1.58 on YouTube and 2.83 on WebSurg (P < .001). The median GQS was 2 on YouTube and 5 on WebSurg (P < .001). The median LAP-VEGaS score was 8 on YouTube and 14.5 on WebSurg (P < .001). The median LDP-SS score was 6 on YouTube and 9.5 on WebSurg (P = .001). According to the LAP-VEGaS, eleven (91.7%) of the WebSurg videos had a high score of 11 or more (P = .04). According to Spearman correlation analysis, there was a statistically significant positive correlation between LDP-SS and JAMA, GQS and LAP-VEGaS (r: .589, P = .002; r: .648, P = .001; r: .848, P < .001 respectively).

The WebSurg is superior to the YouTube in terms of educational and academic value, quality, accuracy, reliability and usability in scientific meetings for LDP videos.

Clamshell thoracotomy (CST) is an emergency procedure performed during traumatic cardiac arrest. Emergency physicians and surgeons are expected to perform this procedure in the Emergency Department. However, the procedure has a low occurrence rate, therefore physicians are often poorly prepared. Current teaching methods include expensive simulators and anatomically inaccurate animal models. The goal of this study was to design, produce and test, a low-cost, high-fidelity model for the teaching of CST.

The model was produced from inexpensive, commercially available materials as well as ADAMgel; a custom, recyclable, inexpensive tissue analogue. The model was tested across 19 physicians, mostly consultants and senior registrars in emergency medicine, anaesthesia and surgery. Participants completed comparative questionnaires before and after testing the model. The questionnaires were adapted from previous anaesthetic-based simulation studies and used a modified Likert scale to assess prior knowledge, anatomical realism and the teaching benefits of the model.

Participants had varied prior knowledge and experience before testing the model. Results showed that 89.47% (n = 17) of trainees felt the model was a reasonable substitute for practice and 100% (n = 19) agreed that the model was a good training aid for inexperienced trainees and would recommend it to others.

The model proved a successful teaching tool, improving physicians’ knowledge and confidence with performing CST. This high fidelity, low cost model demonstrated that a high standard simulation teaching tool can be made which improves teaching of CST.

Laparoscopic Nissen fundoplication (LNF) is the most common standard technique worldwidely for Gastroesophageal reflux disease (GERD). Another type of fundoplication, laparoscopic Toupet fundoplication (LTF), intends to reduce incidence of postoperative complications. A systematic review and meta-analysis are required on short- and long-term outcomes based on randomized controlled trials (RCTs) between LNF and LTF.

We searched databases including PubMed, Cochrane, Embase, and Web of Knowledge for RCTs comparing LNF and LTF. Outcomes included postoperative reflux recurrence, postoperative heartburn, dysphagia and postoperative chest pain, inability to belch, gas bloating, satisfaction with intervention, postoperative esophagitis, postoperative DeMeester scores, operating time (min), in-hospital complications, postoperative use of proton pump inhibitors, reoperation rate, postoperative lower oesophageal sphincter (LOS) pressure (mmHg). We assessed data using risk ratios and weighted mean differences in meta-analyses.

Eight eligible RCTs comparing LNF (n = 605) and LTF (n = 607) were identified. There were no significant differences between the LNF and LTF in terms of postoperative reflux recurrence, postoperative heartburn, postoperative chest pain, satisfaction with intervention, reoperation rate in short and long term, in-hospital complications, esophagitis in short term, and gas bloating, postoperative DeMeester scores, postoperative use of proton pump inhibitors, reoperation rate in long term. LTF had lower LOS pressure (mmHg), fewer postoperative dysphagia and inability to belch in short and long term and gas bloating in short term compared to LNF.

LTF were equally effective at controlling reflux symptoms and improving the quality of life, but with lower rate of complications compared to LNF. We concluded that LTF surgical treatment was superior for over 16 years old patients with typical symptoms of GERD and without upper abdominal surgical history upon high-level evidence of evidence-based medicine.

Laparoscopic Surgery is performed using carbon dioxide gas insufflated into the abdominal cavity to create a space for endoscopic visualization. During a laparoscopic surgical dissection plume is formed from electrocautery dissection. This plume contains viruses and sometimes COVID-19 viruses. The plume obscures the visual field. The unfiltered plume release is dangerous to surgeons, nurses, and patients. The loss of visualization during carbon dioxide release delays surgery. The use of carbon dioxide insufflated gas can have side effects such as C02 embolus, pain from diaphragmatic stretching, physiological complications such as respiratory infections and renal problems. The release of carbon dioxide gas into the atmosphere, unfiltered is significant. This accounts for 7% of greenhouse gases globally. This percentage is rising due to expansion of minimally invasive surgery.

The proposed system for gasless surgery was designed by algorithms of tensegrity and geodesic dome pressures.

100 simulator studies were performed to develop the device to elevate the abdominal wall to create a gas free (isobaric) space for Laparoscopic Surgery. After design freeze, 4 animal studies were performed using ethical research guidelines at Amsterdam Medical Centre Research Department, Netherlands. 3 cadaveric studies were performed using Ethical guidelines at Hackensack University Medical Centre, New Jersey, USA, to evaluate the device in a human setting.

These devices for Laparoscopic Surgery, Robotic Surgery, and Hand Assisted Laparoscopic Surgery (HALS) successfully proved that a superior intra-abdominal space can be created without carbon dioxide insufflation. The devices are patented in USA and Europe.

This paper proposes a small-sized hologram system for the 3D imaging of lesions in a clinical environment. In a general hologram system, the distance between the beam-generating device and the screen (400 mm) and the size of the screen must be increased proportionally to obtain excellent image quality. However, in a clinical environment, the beam spread distance and screen size must be reduced. This paper proposes a method for reducing the beam divergence distance and screen size for clinical applications.

To reduce the beam spread distance and screen size, a beam prism with a 45° refractive index is used to reduce the beam spread distance by 1/3. The direction of the bent light must be adjusted such that it can reach the screen accurately. However, because the reflected light may be refracted owing to the material properties of the mirror and cause loss, this problem can be solved by using a full reflection mirror.

The beam spread distance of the designed hologram system is 200 mm. The types of lesions obtained from the 3D images of the hologram include the lung, liver, and colon. The image resolution is 300 × 145.

If the proposed method is used in a clinical environment, doctors can improve their understanding of the patient quickly and efficiently; thereby, shortening the treatment time. The proposed hologram system is expected to be useful in treatment rooms, operating rooms, and educational programs in medical schools.

Typical surgical microscopes used for fluorescence-based lymph node detection experience limitations such as weight and restricted adjustability of the integrated light emitting diode (LED) and camera. This restricts the capture of detailed images of specific regions within the lesion.

This study proposes a miniature observation robot design that offers adjustable working distance (WD) and rotational radius, along with zoom-in/zoom-out functionality.

A five-degree-of-freedom manipulator was designed, with the end effector incorporating an LED and concave lens to widen the beam width for comprehensive lesion illumination. Additionally, a long-pass filter was integrated into the camera system to enhance image resolution.

Experiments were conducted using a fluorescence-expressing phantom to evaluate the performance of the robot. Results demonstrated a captured image resolution of 9600 × 3240 pixels and a zoom-in/zoom-out capacity of up to 3.68 times.

The proposed robot design is cost-effective and highly adjustable, enabling suitability for rapid and accurate detection of fresh lymph nodes during surgeries. The robot’s capability to detect small lesions (<1 cm), as validated by phantom tests, holds promise for the detection of minute lymph nodes.