The problem of dynamic delamination growth in composite beams is analyzed using finite clement method. The delaminated beam is modeled as two beams above and below the plane of delamination. Spring elements are used to connect the beams in the uncracked portion. The dynamic energy release rate is calculated from the strain energy in the crack-tip springs. The crack is allowed to propagate when the energy release rate reaches a critical value estimated from experiments. The crack growth histories are compared with results from tests on composite beams containing implanted delaminations. The finite element model is found to be adequate in predicting dynamic delamination growth in laminated composite beams.
1. Freund, L. B.1985. “The Mechanics of Dynamic Growth in Solids”, Fundamentals of Deformation and Fracture, B. A. Bilby. K. i. Miller and J. R. Willis, eds., Cambridge: Cambridge University Press, pp. 163–185.
2.
2. Grady, J. E. and C. T. Sun. 1986. “Dynamic Delamination Propagation in a Graphite/Epoxy Laminate”, Composite Materials: Fatigue and Fracture. Astm Stp907, pp. 5–31.
3.
3. Kanninen, M. F.1974. “A Dynamic Analysis of Unstable Crack Propagation and Arrest in the Dcb Test Specimen”, International Journal of Fracture, pp. 415–430.
4.
4. Kanninen, M. F. and C. H. Popelar. 1985. Advanced Fracture Mechanics. New York: Oxford University Press.
5.
5. Shmuely, M.1977. “Analysis of Fast Fracture and Crack Arrest by Finite Differences”, International Journal of Fracture, pp. 443–453.
6.
6. Owen, D. R. J. and D. Shantaram. 1977. “Numerical Study of Dynamic Crack Growth by the Finite Element Method”, International Journal of Fracture, pp. 821–837.
7.
7. Farris, T. N. and i. F. Doyle. 1988. “Estimating Dynamic Stress Intensity Factors in a Lengthwise Cracked Beam Using Remote Data”, Engineering Science Prepring Esp25.88026, Society of Engineering Sciences.
8.
8. Sankar, B. V.1991. “A Finite Element for Modeling Delaminations in Composite Beams”, Computers and Structures. 38(2):239–246.
9.
9. Sankar, B. V. and M. A. Pinheiro. 1990. “An Offset Beam Finite Element for Fracture Analysis of Delaminations”, AIAA 31st Sdm Conference, Long Beach. Ca. April 1990. pp. 1227–1233.
10.
10. Hu, S.1990. “Dynamic Delamination Propagation in Composite Beams Under Impact”, PhD dissertation. University of Florida, Gainesville, Fl.
11.
11. Cordell, T. M. and P. O. Sjoblom. 1986. “Low Velocity Impact Testing of Composites”, Proceedings of the American Society for Composites. First Technical Conference. Lancaster, Pa: Technomic Publishing Co., pp. 297–312.
12.
12. Sankar, B. V. and C. T. Sun. 1985. “An Efficient Numerical Algorithm for Transverse Impact Problems”, Computers & Structures, Vol. 20, pp. 1009–1012.
