A New MR Fluid-Elastomer Vibration Isolator

Abstract

In this study, the performance of a new design concept utilizing a magnetorheological (MR) fluid composite material is examined through encapsulating a MR fluid into an elastomer. A prototype MR Fluid-Elastomer (MRF-E) Vibration Isolator is built and its dynamic behavior is studied in oscillatory compressions for a wide range of frequencies under various applied magnetic fields. The experimental results show that both the stiffness and the damping capability of the MRF-E Vibration Isolator is a function of the displacement amplitude and magnetic field strength, and only weakly dependent upon the frequency of excitation. This demonstrates that the new vibration isolator, whose mechanical properties can be controlled by an applied magnetic field, has potential in applications where tuning vibration characteristics are desired.

Keywords

magnetorheological elastomer vibration isolation.

References

Ahn, Y.K. , et al. 2004. `` A New Type Controllable Squeeze Film Damper Using An Electromagnet ,'' Journal of Vibration and Acoustics , 126: 380—383 .

Ginder, J.M. , et al. 2001. `` Magnetorheological Elastomers in Tunable Vibration Absorbers '', Proceedings of the SPIE - The International Society for Optical Engineering, 4331: 103—110 .

Jolly, M.R. and Carlson, J.D. 1996. `` Controllable Squeeze Film Damping using Magnetorheological Fluid ,'' 5th International Conference on New Actuators , Bremen, Germany, 26—28 June 1996.

Jolly, M.R. , et al. 1996. `` The Magnetoviscoelastic Response of Elastomer Composites Consisting of Ferrous Particles Embedded in a Polymer Matrix,'' Journal of Intelligent materials, Systems and Structures , 7: 613—622 .

Sims N.D. , et al. 2001. ``Design, Testing and Model Validation of an MR Squeeze-flow Vibration Damper,'' Smart Structures and Materials 2001: Damping and Isolation Proceedings of SPIE, 4331: 111—120 .

Stanway, R. , et al. 1992. `` ER Fluids in the Squeeze-flow Mode: an Application to Vibration Isolation ,'' Journal of Electrostatics , 28: 89—94 .

Tang, X. , et al. 1998. `` Testing and Modeling of an MR Damper in the Squeeze Flow Mode ,'' In: Nakana, M. and Koyama, K. (eds), Proceedings of the 6th International Conference on Electro-Rheological Fluids, Magneto-Rheological Suspensions and Their Applications, World Scientific, Singapore, pp. 870—878.

Wang, X. , et al. 1999. `` Testing and Modeling a Cone-Shaped Squeeze-Film Mode Electrorheological Damper ,'' Journal of Intelligent Material Systems and Structures, 10: 748—752 .

Wang, X. , et al. 2004. ``Dynamic Behaviors of Magnetorheological Fluid-Elastomer Composites Under Oscillatory Compression,'' Damping and Isolation , In: Wang, K.-W. (ed.), Proceedings of SPIE Conference on Smart Materials and Structures, 5386: 250—258 .

10.

Wang, X. , et al. 2005. `` A Magnetorheological Fluid-Elastomer Vibration Isolator,'' Damping and Isolation , In: Wang, K.-W. (ed.), Proceedings of SPIE Conference on Smart Materials and Structures, 5760: 217—225 .

11.

Yao, G.Z. , et al. 1999. `` Vibration Control Of A Rotor System By Disk-type Electrorheological Damper,'' Journal of Sound and Vibration, 219(1): 175—188 .