Computational Evaluation of Elasto-Viscoplastic Deformation and Strength of Rubber Blended Semi-crystalline Polymer

Abstract

In order to clarify the elasto-viscoplastic deformation behavior and strength of rubber blended semi-crystalline polymer, micro- to mesoscopic mechanical behavior was modeled by using large deformation finite element homogenization method. In this model, dimension of mesostructure is identified by the volume fraction of interface region around the rubber particles. The effects of strain rate and the size of rubber particles on the mesoscopic true stress—strain relation, strain rate distribution in mesoscopic area, and change in mesoscopic morphology with deformation are investigated by numerical simulation of uniaxial tensile deformation of semi-crystalline polymer with nonuniformly distributed rubber particles. A series of computational simulations clarified that mechanical behavior of blend polymer is strongly affected by the size of rubber particles. Mesoscopic true stress—strain relationship shows softening for blend polymer with large rubber particles, which is closely related to the distribution of strain rate on mesoscopic scale. When the rubber particles are large, local strain rate is highly concentrated in the ligament area between adjacent rubber particles, while it distributes in larger area of semi-crystalline polymer matrix in case of small rubber particles. The difference in these localized deformation leads to characteristic change in the size and shape of rubber particles with straining. Nonuniform deformation in mesoscopic area caused by heterogeneous rubber particle distribution is emphasized by high strain rate and large rubber particles. Furthermore, maximum mean stress generated in semi-crystalline polymer matrix is very high when the size of rubber particles is smaller than or ligament thickness is larger than a specific value. The specific thickness corresponds to the critical value for brittle-ductile transition of rubber blended semi-crystalline polymer obtained by impact test.

Keywords

rubber blended semi-crystalline polymer rubber particle lamellar orientation multiscale homogenization method computational simulation FEM.

References

Arruda, E.M. and Boyce, M.C. ( 1993). A Three-dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials, J Mech. Phys. Solids, 41: 389-412.

Bartczak, Z. , Argon, A.S. , Cohen, R.E. and Weinberg, M. ( 1999). Toughness Mechanism in Semi-crystalline Polymer Blends: I. High-density Polyethylene Toughened with Rubbers, Polymer , 40: 2331-2346.

Bowden, P.B. and Young, R.J. ( 1974). Deformation Mechanisms in Crystalline Polymers, J. Mater. Sci., 9: 2034-2051.

Higa, Y. and Tomita, Y. ( 1999). Computational Prediction of Mechanical Properties of Nickel-based Superalloy with Gamma Prime Phase Precipitates, Advance Materials and Modeling of Mechanical Behavior, III: pp. 1095-1099, Fleming Printing Ltd.

Hill, R. ( 1948). A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proc. Roy. Soc., London, A193: 281-297.

Hutchinson, J.W. ( 1976). Bounds and Self-consistent Estimates for Creep of Polycrystalline Materials, Proc. Roy. Soc. London., A348: 101-127.

Muratoglu, O.K. , Argon, A.S. and Cohen, R.E. ( 1995). Crystalline Morphology of Polyamide-6 Near Planar Surfaces , Polymer, 36: 2143-2152.

Peirce, D. , et al. (1983). Material Rate Dependence and Localized Deformation in Crystalline Solids, Acta Metallurgica, 31: 1951-1976.

Steenbrink, A.C. and Van der Giessen, E. ( 1998). Strain Localization and Void Growth in Polymers, Borst, R. and Van der Giessen, E. (eds), Material Instabilities in Solids, pp. 287-302, John Wiley & Sons Ltd.

10.

Tomita, Y. and Lu, W. ( 2002). Characterization of Micro- to Macroscopic Response of Polymers Containing Voids Under Macroscopically Uniform Deformation, Int. J. Solids Struct., 39: 3409-3428.

11.

Tomita, Y. and Uchida, M. ( 2004). Computational Evaluation of Micro- to Macroscopic Deformation Behavior of Amorphous Polymer with Slightly Heterogeneous Distribution of Initial Shear Strength, IUTAM Symposium on Meso-scopic Dynamics in Fracture Process and Strength of Materials, Kitagawa, H. and Shibutani, Y. (eds), pp. 245-254, Kluwer Academic.

12.

Tomita, Y. and Uchida, M. ( 2005), Computational Characterization of Micro- to Mesoscopic Deformation Behavior of Semicrystalline Polymer, Int. J. Mech. Sci., 47(4-5): 687-700.

13.

Tomita, Y. , Adachi, T. and Tanaka, S. ( 1997). Modelling and Application of Constitutive Equation for Glassy Polymer Based on Nonaffine Network Theory, Eur. J. Mech. A/ Solids, 16: 745-755.

14.

Tzika, P.A. , Boyce, M.C. and Parks, D.M. ( 2000). Micromechanics of Deformation in Particle-toughened Polyamides , J. Mech. Phys. Solids, 48: 1893-1929.

15.

Uchida, M. and Tomita, Y. ( 2002). Deformation of Crystalline Polymers Containing Amorphous Phase, Proc. CMD2002, 111-112 (in Japanese).

16.

Uchida, M. et al (2006). Micro- to Mesoscopic Deformation Behavior of Spherulite of Semicrystalline Polymer, Trans. JSME, 73: 73-79 (in Japanese).

17.

Van Dommelen, J.A.W. , Brekelmans, W.A.M. and Baaijens, F.P.T. ( 2003). Micromechanical Modeling of Particle-toughening of Polymers by Locally Induced Anisotropy, Mech. Mater., 35: 845-863.

18.

Wu, S. ( 1985). Phase Structure and Adhesion in Polymer Blends: A Criterion for Rubber Toughening, Polymer, 26: 1855-1863.