Abstract
Objective
To investigate the use of bonded molar tubes (BMTs) by specialist orthodontists.
Design
Prospective postal questionnaire.
Setting
Ireland.
Participants
Registered members of the Orthodontic Society of Ireland.
Method
A questionnaire was posted to registered members of the Orthodontic Society of Ireland. It investigated demographics, pattern of use, reasons for use and techniques for placement of BMTs.
Results
A 74% response rate was obtained. In more than 80% of cases, BMTs were used on first and second permanent molars by 52% and 33% of orthodontists respectively. BMT usage was adopted by 97% of respondents in the previous decade. Direct bonding was used by all for BMT placement. Etch times for molars, compared to other teeth, increased from 15 to 30 seconds by 51% of orthodontists. Of the respondents, 97% used light-cured adhesives and 17% used self-etching primers. Molar tube holders were preferred by 54% for placement. Only with a history of epilepsy, were bands preferred to BMTs. BMTs were regarded as more cost-effective than molar bands by 66% of responding clinicians.
Conclusions
Specialist orthodontists preferred BMTs to bands on first permenent molars. Direct bonding was favoured using a 30-second etch, a light-cured primer and adhesive with specialized molar tube holders. BMTs were perceived to be more cost-effective than molar bands.