A full three-dimensional (3D) thermo-mechanical finite element (FE) model has been developed to simulate the step-by-step multipass welding process. Non-linearities associated with welding, such as a moving heat source, material deposition, temperature-dependent material properties, latent heat, and large deformations, were taken into account. The model was applied to multipass butt-welded mild steel plate and girth butt-welded stainless steel pipe for validation. The simulation results were compared with independently obtained experimental data and numerical predictions from two-dimensional (2D) generalized plane strain and axisymmetric models. Good agreements between the 3D predictions and experimental data have been obtained. The computational model has the potential to be applied to multipass welded complex geometries for residual stress prediction.
MuruganS.RaiS. K.KumarP. V.JayakumarT.RajB.BoseM. S. C.Temperature distribution and residual stresses due to multipass welding in type 304 stainless steel and low carbon steel weld padsInt. J. Pressure Vessels and Piping, 2001, 78 (4), 307–317.
2.
SmithD. J.BouchardP. J.GeorgeD.Measurement and prediction of residual stresses in thick-section steel weldsJ. Strain Analysis, 2000, 35 (4), 287–305.
3.
BouchardJ.BradfordC.Validated axial residual stress profiles for fracture assessment of austenitic stainless steel pipe girth welds. Proceedings of the ASME Pressure Vessels and Piping Conference, 22–26 July 2001, Atlanta, Georgia, Fracture and Fitness (Ed. LidburyD.), 2001, PVP Vol. 423, pp. 93–99 (American Society of Mechanical Engineers, New York).
4.
DongP.On the mechanics of residual stresses in girth welds. Proceedings of the ASME Pressure Vessels and Piping Conference, 25–29 July 2004, San Diego, California, Residual Stress, Fracture and Stress Corrosion Cracking (Ed. WangY. Y.), 2004, PVP Vol. 479, pp. 119–124 (American Society of Mechanical Engineers, New York).
5.
FreeA.Porter GoffR. F. D.Predicting residual stresses in multi-pass weldments with the finite element methodComputers Structs, 1989, 32 (2), 365–378.
6.
LeungC. K.PickR. J.Finite element analysis of a multipass weldWelding Res. Council Bull., 1990, 356, 11–33.
7.
ShimY.FengZ.LeeS.KimD.JaegerJ.PapritanJ. C.TsaiC. L.Determination of residual stresses in thick-section weldmentsWelding J., 1992, 71 (9), 305–312.
8.
LindgrenL.-E.RunnemalmH.NisstrimM. O.Numerical and experimental investigation of multipass welding of a thick plateInt. J. Numer. Methods Engng, 1999, 44 (9), 1301–1316.
9.
RybickiE. F.SchmueserD. W.StonesiferR. B.GroomJ. J.MishlerH. W.A finite element model for residual stresses and deflections in girth-butt welded pipesASME J. Pressure Vessel Technol., 1978, 100 (10), 256–262.
10.
RosenthalD.Mathematical theory of heat distribution during welding and cuttingWelding J. Res. Suppl., 1941, 20 (5), 220–234.
11.
MichalerisP.Residual stress distributions for multipass welds in pressure vessel and piping components. Proceedings of the ASME Pressure Vessels and Piping Conference, 21–26 July 1996, Montreal, Canada, Residual Stresses in Design, Fabrication, Assessment and Repair (Eds WarkeR. W.DongP.DermenjianA.), 1996, PVP Vol. 327, pp. 17–27 (American Society of Mechanical Engineers, New York).
12.
TekriwalP.MazumderJ.Transient and residual thermal strain-stress analysis of GMAW. ASME JEngng Mater. Technol., 1991, 113 (3), 336–349.
13.
JiangW.YahiaouiK.WangC. J.HallF. R.LaouiT.FE predictions of temperature distributions in a multipass welded piping branch junction. Proceedings of the ASME Pressure Vessels and Piping Conference, 25–29 July 2004, San Diego, California, High Pressure Technology - 2004: Innovations and Advances in High Pressure Equipment (Ed. PfeiferJ.), 2004, PVP Vol. 473, pp. 93–100 (American Society of Mechanical Engineers, New York).
14.
LeggattR. H.SmithD. J.SmithS. D.FaureF.Development and experimental validation of the deep hole method for residual stress measurementJ. Strain Analysis, 1996, 31 (3), 177–186.
15.
KarlssonR. I.JosefsonB. L.Three-dimensional FE analysis of temperatures and stresses in a single-pass butt welded pipe. ASME JPressure Vessel Technol., 1990, 112 (1), 77–84.
16.
ABAQUS User's Manual, Version 6.3, 2002 (Hibbitt, Karlsson and Sorensen, Inc.).
17.
DongP.Residual stress analysis of a multipass girth weld: 3D special shell versus axisymmetric modelsASMEJ. J. Pressure Vessel Technol., 2001, 123 (2), 207–213.
18.
ASM International Handbook Committee, Metals Handbook, 10th edition, 1990 (ASM International, Materials Park, Ohio).
