Force feedback temperature control for hot-tool plastic foam cutting

Abstract

This paper presents the ideation of a force feedback temperature control system for advanced hot-tool plastic foam cutting systems. With respect to other controllers, the force feedback temperature control strategy is simple to apply given that it modulates the electrical power input independent of the predetermined tool path and feed rate. The control strategy is implemented by making a series of one-dimensional cuts with a hot wire. The electrical power input to the hot wire is modulated to provide constant tool temperature. Since the cutting force and kerf width are both dependent on the tool temperature, maintaining a constant tool temperature results in consistent cut surface characteristics. The force feedback temperature control theory and its practical implementation in one dimension are presented as well as an accurate description of the cutting process. Experimental results are presented to validate both theoretical assumptions and practical benefits. A number of barriers to implementation for three-dimensional sculpting are discussed with possible solutions. The experimental results validate the predictions that force feedback temperature control is an effective control method for hot-tool plastic foam cutting.

Keywords

temperature control hot wire polystyrene foam expanded polystyrene extruded polystyrene kerf width

References

Brooks

Aitchison

, ‘Thermal plastic foam cutting mechanics for rapid prototyping and manufacturing purposes’. In Proceedings of the Ninth National Conference on Rapid design, prototyping and manufacturing, Lancaster University, UK, 13 June 2008, pp. 33–40 (CRDM).

Croma , Foam processing technologies, available from http://www.croma-foamcutter.com/ (access date 13 March 2008) Demand Products Inc, Foam cutting, available from http://www.demandproducts.com/foamcut.html, (access date 13 March 2008).

HotWireDirect , Foam cutting machines, available from http://www.hotwiredirect.com/ (access date 13 March 2008).

Brooks

Aitchison

, ‘A review of state-of-the-art large sized foam cutting rapid prototyping nad manufacturing technologies’ The Rapid Prototyping J. (2009): Accepted.

Posthuma

, Development of a novel robotically effected plastic foam sculpting system for rapid prototyping and manufacturing. ME Thesis, p. 144, Department of Mechanical Engineering. University of Canterbury, 2007.

Ahn

D. G.

Lee

S. H.

Yang

D. Y.

, ‘Investigation into thermal characteristics of linear hotwire cutting system for variable lamination manufacturing (VLM) process by using expandable polystyrene foam’ Int. J. Mach. Tools Mf, 42 (2002): 427–439.

Ahn

D. G.

Lee

S. H.

Yang

D. Y.

, ‘Investigation into development of progressive-type variable lamination manufacturing using expandable polystyrene foam and its apparatus’ Proc. IMechE, Part B: J. Engineering Manufacture, 216 (2002): 1239–1252.

Ahn

D. G.

Lee

S. H.

Yang

D. Y.

, ‘A study on the influence of the sloped cutting angle on kerfwidth and part quality in the hotwire cutting of EPS foam for the VLM- rapid prototyping process’ Int. J. Mach. Tools Mf, 43 (2003): 1447–1464.

Ahn

D. G.

Lee

S. H.

Yang

D. Y.

, ‘Influence of process parameters on the surface roughness in hotwire cutting of EPS foam sheet for VLM-S rapid prototyping process’ J. Mater. Sci., 40 (2005): 5699–5702.

10.

Broek

Horvath

de Smit

, ‘Exploration of influential parameters for speed control of the flexible blade cutting process’ In Proceedings of Tools and methods of competitive engineering (TMCE), Fourth International Symposium, Huazhong University of Science and Technology, Wuhan, China, 22–26 April 2002.

11.

Broek

J. J.

Horvath

de Smit

Lennings

A. F.

Rusak

Vergeest

J. S. M.

, ‘Free-form thick layer object manufacturing technology for large-sized physical models’ Autom. Constr., 11 (2002): 335–347.

12.

De Smit

Broek

Horvath

, ‘Experimental investigation of factors influential for the flexible blade based prototyping process’ In Proceedings of the 1999 ASME Technical Conference on Design engineering Las Vegas, Nevada, 1999 (ASME).

13.

De Smit

Broek

Horvath

Lennings

, ‘Implementation of the freeform thick layered object manufacturing technology (FF-TLOM), a status review’. In Proceedings of the Ninth European Conference on Rapid prototyping and manufacturing, 2000, pp. 311–321.

14.

Aitchison

Bain

Brooks

Posthuma

Taylor

, ‘Transient temperature effects in hot-wire plastic foam cutting’. In Proceedings of the Fourth International Conference and Exhibition on Design and production of machines and dies/molds, Cesme, Turkey, 21–23 June 2007, pp. 219–224.

15.

Aitchison

Brooks

Kandula

Kraus

Taylor

, ‘Feed-rate, temperature and feed-force relationships for foam plastics cut by a taut hot-wire’. In Proceedings of the International Conference on Manufacturing science and technology Melaka, Malaysia, 2006.

16.

Aitchison

Sulaiman

, ‘Determining the surface form of polystyrene through the coordinate measurement machine’ Proc. IMechE, Part C: J. Mechanical Engineering Science, 217 (2003): 839–844.

17.

Aitchison

D. R.

Sulaiman

, ‘A new adaptable rapid prototyping & manufacturing approach for producing a variety of foam-based product solutions’. In Proceedings of NordDesign 2004—Product design in changing environment, Tampere, Finland, 2004.

18.

Gallina

, ‘Delayed reference control for hotwire cutting of expandable polystyrene foam’ Trans. ASME, J. Mfg, Sci Engng, 128 (2006): 360–365.

19.

Gallina

Mosca

Pascutto

, ‘Optimized hotwire cutting robotic system for expandable polystyrene foam’. In Proceedings of the Seventh International Conference on Advanced manufacturing systems and technology, Udine, Italy, 9–10 June 2005, pp. 377–386 (Springer, Udine, Italy).

20.

Brooks

, Plastic foam cutting mechanics for rapid prototyping and manufacturing technologies. PhD Thesis, Department of Mechanical Engineering. University of Canterbury, 2009.

21.

Mehta

Biederman

Shivkumar

, ‘Thermal degradation of foamed polystyrene’ J. Mater. Sci. 30 (11) (1995): 2944–2949.