Determination of the Syringyl/Guaiacyl Ratio of Eucalyptus Globulus Wood Lignin by near Infrared-Based Partial Least Squares Regression Models Using Analytical Pyrolysis as the Reference Method
Available accessResearch articleFirst published online October, 2011
Determination of the Syringyl/Guaiacyl Ratio of Eucalyptus Globulus Wood Lignin by near Infrared-Based Partial Least Squares Regression Models Using Analytical Pyrolysis as the Reference Method
High syringly/guaiacyl (S/G) ratios are advantageous for chemical pulp production due to higher delignification rates, higher pulp yields and lower chemical consumption. Near infrared-based partial least-squares regression (PLS-R) models were developed to assess the S/G ratio of Eucalyptus globulus wood using analytical pyrolysis as the reference method. The PLS-R models obtained using the wavenumber range from 6100cm−1 to 5450cm−1 (1639–1835nm) of the preprocessed spectra using first derivative (1stDer) and first derivative in combination with; vector normalisation (1stDerVN), multiplicative scatter correction (1stDerMSC) and straight-line-subtraction (1stDerSLS), and the second derivative (2ndDer), are well qualified for rapid screening the S/G ratio of Eucalyptus globulus wood. Overall, models using 1stDerVN and 1stDerMSC preprocess (78 samples) requiring only three PLS components have the best statistics with coefficient of determination (r2) = 0.97, root mean square error of cross-validation (RMSECV)=0.025 and residual prediction deviation (RPD) = 5.7
SarkanenK.V. and HergertH.L., in Lignins: Occurrence, Formation, Structure and Function, Ed by SarkanenK.V. and LudwigC.H.Wiley Interscience: New York, USA, p. 43 (1971).
2.
ChangH. and SarkanenK.V., “Species variation in Lignin — Effect of species on rate of kraft delignification”, TAPPI J.56, 132 (1973).
3.
FergusB.J. and GoringD.A.I., “Topochemistry of delignification in kraft and neutral sulphite pulping of birch wood”, Pulp Paper Mag. Can.70, 65 (1969).
4.
TsutsumiY.KondoR.SakaiK. and ImamuraH., “The difference of reactivity between syringyl lignin and guaiacyl lignin in alkaline systems”, Holzforschung49, 423 (1995). doi: 10.1515/hfsg.1995.49.5.423
5.
CollinsD.J.PilottiC.A. and WallisA.F.A., “Correlation of chemical-composition and kraft pulping properties of some Papua-New-Guinea reforestation woods”, Appita J.43, 193 (1990).
6.
WallisA.F.A.WearneR.H. and WrightP.J., “Analytical characteristics of plantation eucalypt woods relating to kraft pulp yields”, Appita J.49, 427 (1996).
7.
del RioJ.C.GutierrezA.HernandoM.LandinP.RomeroJ. and MartinezA.T., “Determining the influence of eucalypt lignin composition in paper pulp yield using Py-GC/MS”, J. Anal. Appl. Pyrolysis74, 110 (2005). doi: 10.1016/j.jaap.2004.10.010
8.
AlvesA.GierlingerN.SchwanningerM. and RodriguesJ., “Analytical pyrolysis as a direct method to determine the lignin content in wood: Part 3. Evaluation of species-specific and tissue-specific differences in softwood lignin composition using principal component analysis”, J. Anal. Appl. Pyrolysis85, 30 (2009). doi: 10.1016/j.jaap.2008.09.006
9.
AlvesA.RodriguesJ.WimmerR. and SchwanningerM., “Analytical pyrolysis as a direct method to determine the lignin content in wood. Part 2: Evaluation of the common model and the influence of compression wood”, J. Anal. Appl. Pyrolysis81, 167 (2008). doi: 10.1016/j.jaap.2007.11.001
10.
AlvesA.SchwanningerM.PereiraH. and RodriguesJ., “Analytical pyrolysis as a direct method to determine the lignin content in wood—Part 1: Comparison of pyrolysis lignin with Klason lignin”, J. Anal. Appl. Pyrolysis76, 209 (2006). doi: 10.1016/j.jaap.2005.11.004
11.
RodriguesJ.MeierD.FaixO. and PereiraH., “Determination of tree to tree variation in syringyl/guaiacyl ratio of Eucalyptus globulus wood lignin by analytical pyrolysis”, J. Anal. Appl. Pyrolysis48, 121 (1999). doi: 10.1016/S0165-2370(98)00134-X
12.
RodriguesJ.GracaJ. and PereiraH., “Influence of tree eccentric growth on syringyl/guaiacyl ratio in Eucalyptus globulus wood lignin assessed by analytical pyrolysis”, J. Anal. Appl. Pyrolysis58/59, 481 (2001). doi: 10.1016/S0165-2370(00)00121-2
13.
YokoiH.NakaseT.IshidaY.OhtaniH.TsugeS.SonodaT. and OnaT., “Discriminative analysis of Eucalyptus camaldulensis grown from seeds of various origins based on lignin components measured by pyrolysis–gas chromatography”, J. Anal. Appl. Pyrolysis57, 145 (2001). doi: 10.1016/S0165-2370(00)00137-6
14.
AlvesA.SchwanningerM.PereiraH. and RodriguesJ., “Calibration of NIR to assess lignin composition (H/G ratio) in maritime pine wood using analytical pyrolysis as the reference method”, Holzforschung60, 29 (2006). doi: 10.1515/hf.2006.006
15.
NunesC.A.LimaC.F.BarbosaL.C.A.ColodetteJ.L.GouveiaA.F.G. and SilverioF.O., “Determination of Eucalyptus spp lignin S/G ratio: A comparison between methods”, Bioresource Technol.101, 4056 (2010). doi: 10.1016/j.biortech.2010.01.012
16.
BarbosaL.C.A.MalthaC.R.A.SilvaV.L. and ColodetteJ.L., “Determination of the syringyl/guaiacyl ratio in eucalyptus wood by pyrolysis–gas chromatography/ mass spectrometry (PY-GC/MS)”, Quimica Nova31, 2035 (2008). doi: 10.1590/S0100-40422008000800023
17.
LimaC.F.BarbosaL.C.A.MarceloC.R.SilverioF.O. and ColodetteJ.L., “Comparison between analytical pyrolysis and notrobenzene oxidation for determination of syrnigyl/guaiacyl ratio in Eucalyptus spp. lignin”, Bioresources3, 701 (2008).
18.
MeierD. and FaixO., in Methods in Lignin Chemistry, Ed by LinS.Y. and DenceC.W.Springer-Verlag, Berlin, Germany, p. 177 (1992).
19.
BailleresH.DavrieusF. and PichavantF.H., “Near infra-red analysis as a tool for rapid screening of some major wood characteristics in a eucalyptus breeding program”, Ann. Forest Sci.59, 479 (2002). doi: 10.1051/forest:20032
20.
YamadaT.YehT.F.ChangH.M.LiL.G.KadlaJ.F. and ChiangV.L., “Rapid analysis of transgenic trees using transmittance near-infrared spectroscopy (NIR)”, Holzforschung60, 24 (2006). doi: 10.1515/HF.2006.005
21.
HouS. and LiL.G., “Rapid characterization of woody biomass digestibility and chemical composition using near-infrared spectroscopy”, J. Integr. Plant Biol.53, 166 (2011). doi: 10.1111/j.1744-7909.2010.01003.x
22.
StackpoleD.J.VaillancourtR.E.AlvesA.RodriguesJ. and PottsB.M., “Genetic variation in the chemical components of Eucalyptus globulus wood”, G3 Genes/Genomes/Genetics1, 151 (2011). doi: 10.1534/q3.111.000372
23.
StackpoleD.J.VaillancourtR.E.de AguigarM. and PottsB.M., “Age trends in genetic parameters for growth and wood density in Eucalyptus globules”, Tree Genet. Genomes6, 179 (2010). doi: 10.1007/s11295-009-0239-4
24.
StackpoleD.J.VaillancourtR.E.DownesG.M.HarwoodC.E. and PottsB.M., “Genetic control of kraft pulp yield in Eucalyptus globules”, Can. J. Forest Res.40, 917 (2010). doi: 10.1139/x10-035
25.
Sousa-CorreiaC.AlvesA.RodriguesJ.C.Ferreira-DiasS.AbreuJ.M.MaxtedN.Ford-LloydB. and SchwanningerM., “Oil content estimation of individual kernels of Quercus ilex subsp. rotundifolia [(Lam) O. Schwarz] acorns by Fourier transform near infrared spectroscopy and partial least squares regression”, J. Near Infrared Spectrosc.15, 247 (2007). doi: 10.1255/jnirs.733
26.
AlvesA.SantosA.da Silva PerezD.RodriguesJ.HelenaP.SimoesR. and SchwanningerM., “NIR PLSR model selection for Kappa number prediction of maritime pine Kraft pulps”, Wood Sci. Technol.41, 491 (2007). doi: 10.1007/s00226-007-0130-0
27.
MichellA.J., “Pulpwood quality estimation by near-infrared spectroscopic measurements on eucalypt woods”, Appita J.48, 425 (1995).
28.
AllM.EmsleyA.M.HermanH. and HeywoodR.J., “Spectroscopic studies of the ageing of cellulosic paper”, Polymer42, 2893 (2001). doi: 10.1016/S0032-3861(00)00691-1
29.
OsborneB.G. and FearnT., Near Infrared Spectroscopy in Food Analysis.Longman Scientific & Technical, Harlow, Essex, UK (1998).
30.
WilliamsP. and NorrisK.Near-Infrared Technology in The Agricultural and Food Industries, 2nd Edn.American Association of Cereal Chemists, Inc., St Paul, Minnesota, USA (2004).
31.
WorkmanJ. and WeyerL., Practical Guide to Interpretive Near-Infrared Spectroscopy, 1st Edn.CRC Press, Boca Raton, USA (2007).
32.
SavitzkyA. and GolayM., “Smoothing and differentiation of data by simplified least squares procedures”, Anal. Chem.36, 1627 (1964). doi: 10.1021/ac60214a047
33.
WilliamsP.C. and SoberingD.C., “Comparison of commercial near-infrared transmittance and reflectance instruments for analysis of whole grains and seeds”, J. Near Infrared Spectrosc.1, 25 (1993). doi: 10.1255/jnirs.3
34.
GuerraA.ElissetcheJ.P.NorambuenaM.FreerJ.ValenzuelaS.RodriguezJ. and BalocchiC., “Influence of lignin structural features on Eucalyptus globulus kraft pulping”, Ind. Eng. Chem. Res.47, 8542 (2008). doi: 10.1021/ie800320d
35.
RencoretJ.GutierrezA. and del RioJ.C., “Lipid and lignin composition of woods from different eucalypt species”, Holzforschung61, 165 (2007). doi: 10.1515/hf.2007.030
36.
OnaT.SonodaT.ItoK.ShibataM.TamaiY. and KojimoY., “Use of the radially divided increment core method to assess pulpwood quality for eucalypt breeding in E-camaldulensis and E-globulus”, Appita J.49, 325 (1996).
37.
BoseS.K.FrancisR.C.GovenderM.BushT. and SparkA., “Lignin content versus syringyl to guaiacyl ratio amongst poplars”, Bioresour Technol.100, 1628 (2009). doi: 10.1016/j.biortech.2008.08.046
38.
ChoiJ.W.FaixO. and MeierD., “Characterization of residual lignins from chemical pulps of spruce (Picea abies L.) and beech (Fagus sylvatica L.) by analytical pyrolysis–gas chromatography/mass spectrometry”, Holzforschung55, 185 (2001). doi: 10.1515/hf.2001.031
39.
GenuitW.BoonJ.J. and FaixO., “Characterization of beech milled wood lignin by pyrolysis–gas chromatography–photoionization mass spectrometry”, Anal. Chem.59, 508 (1987). doi: 10.1021/ac00130a029
40.
RodriguesJ.AlvesA.PereiraH.da Silva PerezD.ChantreG. and SchwanningerM., “NIR PLSR results obtained by calibration with noisy, low-precision reference values: Are the results acceptable?”, Holzforschung60, 402 (2006). doi: 10.1515/HF.2006.063
