Journal of Veterinary Dentistry

A search of the medical and dental records at the Matthew J. Ryan Veterinary Hospital of the University of Pennsylvania was conducted to identify dogs that received full or partial prosthodontic crowns over a 13-year period (2000–2012). Forty-one dogs with a total of 68 prosthodontic crowns were identified. Further criteria for acceptance into the study included presence of complete medical records containing adequate information pertaining to the procedures performed, and current follow-up either by telephone, electronic mail, or via in-person examination. Treatment was considered to be successful when the prosthodontic crown was in place and there was no further structural injury to the tooth upon making contact with the client or at the time of death of the dog confirmed by the client. The mean number of days the prosthodontic crowns remained in place without further injury to the tooth was 1,598 (range, 161–4,464 days [median, 1,414 days], standard deviation 1,093 days). Bond failure between the cement and the tooth or the cement and the prosthodontic crown occurred in 3 cases (4.4%). Fracture of the prosthodontically treated tooth occurred in an additional 7 cases (10.3%). Treatment was classified as successful in 58 cases (85.3%). The results suggest that prosthodontic crown therapy is a successful, practical, and durable treatment option for protection of previously injured teeth in pet and working dogs.

Previous work suggests that the tooth height to diameter ratio (H/D) may have an influence on the fracture resistance of dog canine teeth. Thus, it can be hypothesized that canine teeth with distal abrasion or teeth already requiring pulpal manipulation may benefit from a reduction in height and that an ideal H/D exists that balances tooth fracture resistance and tooth function. Therefore, a study was performed to investigate the influence of H/D on force to fracture and probability of fracture of canine teeth in dogs. Thirty extracted canine teeth from laboratory Beagle dogs were standardized by hard tissue volume and evenly distributed among three groups; unaltered H/D (group A), 10% reduction in H/D (group B), and 20% reduction in H/D (group C). The teeth were potted in clear auto-polymerizing orthodontic acrylic and then secured within a universal materials testing machine. A displacement was applied at a speed of 1-mm/min to the distoocclusal line angle at an angle of 45° to the long axis of the crown. The maximum measured force at the time of fracture represented the maximum force to fracture. A linear regression model showed a significant inverse relationship between H/D and force to fracture (p=0.043; 95% CI −55.2 to −0.09). A margin of safety (MoS) analysis was performed to determine the probability of fracture by comparing normal force distributions of the measured force at fracture to that reported in a previous study, representative of normal biting-pulling loads on canine teeth. When 100% of the load was applied to a single unaltered canine tooth the probability of fracture was 36.7%. Decreases in H/D of 10% and 20% resulted in a decreased probability of fracture by 24.1% and 60.4%, respectively. A paired MoS analysis was conducted wherein the applied loads were distributed across 2 maxillary canine teeth according to their relative heights. Within the pair, a 20% decrease in H/D decreased the probability of fracture of that tooth by 86.5%, but increased the probability of fracture of the unaltered contralateral canine tooth by 54.4%. The findings of this study support the hypothesis that teeth with a lower H/D are more resistant to fracture. However, given the potential impact of crown reduction of a single canine tooth on the load redistribution to the remaining unaltered canine teeth, further investigation is needed to determine what H/D would be ideal. In addition, future studies could elucidate in which clinical scenarios the concept of H/D reduction could be implemented. The results of this study may have implications on the successful long-term management of traumatized canine teeth in dogs.

A 9-year-old spayed/female Chinese Pug dog presented for evaluation of a mass located on the rostral aspect of the tongue. An incisional biopsy was acquired, submitted, and interpreted as a possible granular cell tumor based on hematoxylin and eosin, and periodic acid Schiff histopathologic staining characteristics. The diagnosis was supported by immunohistochemical evaluation that was positive for S-100, vimentin, and neuron-specific enolase. Based on the absence of mitotic figures in the incisional biopsy, a partial glossectomy was performed with gross margins of at least 1-cm. The excisional biopsy revealed significant features of malignancy, with neoplastic cells in close association with peripheral nerves, consistent with malignant peripheral nerve sheath tumor. Tumor-free margins were obtained, and the glossectomy had expected healing with no recurrence apparent 6-months following surgery.

Cephalometric studies are important to quantify abnormalities of jaw length and positioning. In this study, 4 to 7-month-old Quarter horse foals (n = 51) were examined to determine overjet (horizontal overlap) prevalence and measure the size of the physiological diastemata. Results were analyzed in relation to age, sex, and lineage. Another aim of this study was to develop a simple field technique for measuring incisor malocclusion and physiological diastemata dimensions that could be used to monitor the growth of the rostral components of maxilla, incisive bone, and mandible. The overall prevalence of overjet lesions in these foals was 51%. Females were overrepresented (61.5%). Overjet occurred more commonly in show foals (50% prevalence) than other working (7.7%) and race (42.3%) lineage foals. Significant differences were found between maxillary and mandibular physiological diastemata lengths in foals of all ages and, as expected, there was a positive statistical correlation between age and maxillary and mandibular physiological diastemata measurements. Incisor overjet was present in 44.4% of 4-month-old foals, 45.5% of 5-month-old foals, 58.3% of 6-month-old foals, and 60% of 7-month-old foals. There was a weak positive correlation between age and the presence of incisor overjet. It was concluded that incisor overjet was common among Quarter horse foals, especially those from show and race lineages. The field technique for physiological diastema measurements was considered effective.