Waste Management & Research: The Journal for a Sustainable Circular Economy

Reducing food losses and waste (FLW) is one of the sustainable ways of closing the food requirement gap in developing countries. However, there is not yet adequate knowledge on the extent of FLW by commodity type and stage of the food supply chain (FSC). Focusing on ten agrarian countries in Africa and building mainly on the Food and Agriculture Organization’s Food Balance Sheets (FBSs), this study generates some new insights on the level of FLW by country, FSC and food type. Across the FSC, we find that these countries lose a cumulative amount equivalent to 28% (641 kilocalories per capita per day – kcal/cap/day) of the current calorie intake. Within the FSC, the production and post-harvest handling stages contribute the greater shares of the total losses with 38% or 244 kcal/cap/day and 34% or 218 kcal/cap/day, respectively. Our results also show that farm incomes would increase by 20% if the avoidable losses and waste were recovered. These results are troublesome given the level of poverty and food insecurity in these countries and suggest inefficient and unsustainable use of natural resources (water and cropland) associated with the FSC losses.

The current investigation deals with the recycling possibilities of poly(vinyl chloride) and poly(methyl methacrylate) in the presence of acrylonitrile butadiene rubber. Recycled blends of poly(vinyl chloride)/poly(methyl methacrylate) are successfully formed from the plastic constituents, those are recovered from waste computer products. However, lower impact performance of the blend and lower stability of the poly(vinyl chloride) phase in the recycled blend restricts its further usage in industrial purposes. Therefore, effective utilisation acrylonitrile butadiene rubber in a recycled blend was considered for improving mechanical and thermal performance. Incorporation of acrylonitrile butadiene rubber resulted in the improvement in impact performance as well as elongation-at-break of the recycled blend. The optimum impact performance was found in the blend with 9 wt% acrylonitrile butadiene rubber, which shows 363% of enhancement as compared with its parent blend. Moreover, incorporated acrylonitrile butadiene rubber also stabilises the poly(vinyl chloride) phase present in the recycled blend, similarly Fourier transform infrared spectroscopy studies indicate the interactions of various functionalities present in the recycled blend and acrylonitrile butadiene rubber. In addition to this, thermogravimetric analysis indicates the improvement in the thermal stability of the recycled blend after the addition of acrylonitrile butadiene rubber into it. The existence of partial miscibility in the recycled blend was identified using differential scanning calorimetry and scanning electron microscopy.

An experimental investigation of operational parameters, including liquid/gas ratio (L/G), inlet nitric oxide (NO) concentration, reaction temperature, and pH value of absorbing agent, on NO removal efficiency with hexamminecobalt(II) solution scrubbing was conducted on a pilot-scale facility to search optimal operation conditions. The experimental results show that NO removal efficiency increased with the pH value of hexamminecobalt solution, while the improving rate dropped gradually. When the reaction temperature increased, the NO removal efficiency increased first and then decreased. At the same time, NO removal efficiency increased with the increasing of L/G and hexamminecobalt concentration, while the removal efficiency did not change much at low NO concentration. The pH of 10.4 and L/G of 16 L/m³ were close to the optimal operation conditions, and the scrubbing temperature fell within a reasonable operation temperature. The experimental results can be used as a reference for the design and operation of scaled-up industrial devices.

A municipal solid waste fee has become an important means for the implementation of the waste management rendered by the government all around the world. Based on the ecological environmental compensation theory, this article constructs an analytical framework of waste charging from the perspective of public policy evaluation, to carry on the comprehensive comparison and analysis to the operability, feasibility, validity, rationality, and universality of the two modes of waste charging: Ration charge and unit-pricing modes. The results indicate that in the cities with large amounts of waste production, long time of waste charging, and high disposal rate, pilot projects should be carried out; and the government needs to improve the construction of associated laws and regulations.

Safe disposal of fly ash generated by coal-based thermal power plants continues to pose significant challenges around the world and in India in particular. Green structural concrete with 80% cement replaced by local Chinese fly ash has been recently developed to achieve a target characteristic compressive strength of 45 MPa. Such green concrete mixes are not only cheaper in cost, but also embody lower energy and carbon footprint, compared with conventional mixes. This study aims to adopt such materials using no less than 80% fly ash as binder in routine concrete works in countries like India with the commonly used lower target characteristic compressive strength of 30 MPa. It is achieved by the simple and practical method of adjusting the water/binder ratio and/or superplasticiser dosage. The proposed green concrete shows encouraging mechanical properties at 7 days and 28 days, as well as much lower material cost and environmental impact compared with commercial Grade 30 concrete. This technology can play an important role in meeting the huge infrastructure demands in India in a sustainable manner.

Regulation is a key tool for implementing municipal solid waste (MSW) management strategies and plans. While local authorities in Israel are responsible for the storage, collection, and disposal of MSW, Israel’s Ministry of Environmental Protection (MoEP) is responsible for the formulation and implementation of waste management policies and legislation. For the past 12 years, about 80% of the MSW in Israel has been landfilled and recycling rates have not increased, despite regulations. This paper presents the state of MSW management in Israel in light of the MoEP’s strategic goal of landfilling reduction, the regulations and legislation designed and implemented for achieving this goal, and the ensuing results. Among other things, the results indicate the importance of monitoring and assessing policy and regulations to examine whether regulation is in fact effective and whether it keeps track of its own targets and goals or not. It is also concluded that even when there is an extensive regulation that includes a wide range of laws, economic penalties and financial incentives (such as landfill levy and financing of MSW separation at source arrangements), this does not guarantee proper treatment or even an improvement in waste management. The key to success is first and foremost a suitable infrastructure that will enable achievement of the desired results.

This study is an assessment of the hydrothermal carbonisation of poultry slaughterhouse wastes sludge for the solid recovered fuel. The effects of hydrothermal carbonisation were evaluated by varying the reaction temperatures in the range of 170 °C–220 °C. After hydrothermal carbonisation was completed, the capillary suction time, time to filter, and particle size decreased by ranges of 170.4 to 25.9 s, 40 to 7.0 s, and 220 to 98 um, respectively, with increasing hydrothermal carbonisation temperature. This effect improved the dewaterability to release additional free water from the sludge. Moreover, hydrothermal carbonisation increased the heating value though the reduction of the hydrogen and oxygen content of solid fuel in addition to investigating drying performance. As shown in the Van Krevelen diagram, the H/C and O/C ratios decreased, in correlation with primary reactions of coalification. These results suggest that the hydrothermal carbonisation process is an advantageous technology in improving the properties of poultry slaughterhouse wastes as an alternative solid recovered fuel by converting the physical and chemical structure of the poultry slaughterhouse wastes in addition to also providing other benefits to treat organic and biomass waste.

The objective of this article was to plan a network for municipal management of construction and demolition waste in Brazil with the assistance of a geographic information system, using the city of Recife as a case study. The methodology was carried out in three stages. The first was to map the illegal construction and demolition of waste disposal points across Recife and classify the waste according to its recyclability. In sequence, a method for indicating suitable areas for installation of voluntary delivery points, for small waste generators, are presented. Finally, a method for indicating suitable areas for the installation of trans-shipment and waste sorting areas, developed for large generators, is presented. The results show that a geographic information system is an essential tool in the planning of municipal construction and demolition waste management, in order to facilitate the spatial analysis and control the generation, sorting, collection, transportation, and final destination of construction and demolition waste, increasing the rate of recovery and recycling of materials.